Section 11 Multi-Function Timer Pulse Unit 2
R01UH0134EJ0400 Rev. 4.00 Page 471 of 2108
Sep 24, 2014
SH7262 Group, SH7264 Group
Bit Bit Name
Initial
Value R/W Description
2 TGFC 0 R/(W)*
1
Input Capture/Output Compare Flag C
Status flag that indicates the occurrence of TGRC input
capture or compare match in channels 0, 3, and 4.
Only 0 can be written, for flag clearing. In channels 1
and 2, bit 2 is reserved. It is always read as 0 and the
write value should always be 0.
[Clearing condition]
When 0 is written to TGFC after reading
TGFC = 1*
2
[Setting conditions]
When TCNT = TGRC and TGRC is functioning as
output compare register
When TCNT value is transferred to TGRC by input
capture signal and TGRC is functioning as input
capture register
1 TGFB 0 R/(W)*
1
Input Capture/Output Compare Flag B
Status flag that indicates the occurrence of TGRB input
capture or compare match. Only 0 can be written, for
flag clearing.
[Clearing condition]
When 0 is written to TGFB after reading
TGFB = 1*
2
[Setting conditions]
When TCNT = TGRB and TGRB is functioning as
output compare register
When TCNT value is transferred to TGRB by input
capture signal and TGRB is functioning as input
capture register