Section 9 Bus State Controller
Page 252 of 2108 R01UH0134EJ0400 Rev. 4.00
Sep 24, 2014
SH7262 Group, SH7264 Group
Bit Bit Name
Initial
Value R/W Description
10 to 7 WR[3:0] 1010 R/W Number of Read Access Wait Cycles
Specify the number of cycles that are necessary for
read access.
0000: No cycle
0001: 1 cycle
0010: 2 cycles
0011: 3 cycles
0100: 4 cycles
0101: 5 cycles
0110: 6 cycles
0111: 8 cycles
1000: 10 cycles
1001: 12 cycles
1010: 14 cycles
1011: 18 cycles
1100: 24 cycles
1101: Reserved (setting prohibited)
1110: Reserved (setting prohibited)
1111: Reserved (setting prohibited)
6 WM 0 R/W External Wait Mask Specification
Specifies whether or not the external wait input is
valid. The specification by this bit is valid even when
the number of access wait cycle is 0.
0: External wait input is valid
1: External wait input is ignored
5 to 2 All 0 R Reserved
These bits are always read as 0. The write value
should always be 0.
1, 0 HW[1:0] 00 R/W Delay Cycles from RD,
W
En Negation to Address,
CSn Negation
Specify the number of delay cycles from RD and WEn
negation to address and CSn negation.
00: 0.5 cycles
01: 1.5 cycles
10: 2.5 cycles
11: 3.5 cycles