Filter
Top Products
Section 22 Renesas SPDIF Interface
Page 1158 of 2108 R01UH0134EJ0400 Rev. 4.00
Sep 24, 2014
SH7262 Group, SH7264 Group
Bit Bit Name
Initial
Value R/W Description
19 NCSI 0 R/W New Channel Status Information
Set this bit to 1 when new channel status information to
be corrected is in the transmitter.
0: New channel status information has not been in
transmitter
1: New channel status information has been in transmitter
18 AOS 0 R/W Audio Only Samples
Clear this bit to 0 when audio channel 1 and channel 2
registers contain user information. When this bit is set to
1, all user bits are cleared to 0.
0: User information present
1: User information not present
17 RME 0 R/W Receiver Module Enable
Enables the receiver module.
0: Receiver module disabled
1: Receiver module enabled
16 TME 0 R/W Transmitter Module Enable
Enables the transmitter module.
0: Transmitter module disabled
1: Transmitter module enabled
15 REIE 0 R/W Receiver Error Interrupt Enable
Enables the receiver error interrupts.
0: Receiver error interrupt disabled
1: Receiver error interrupt enabled
14 TEIE 0 R/W Transmitter Error Interrupt Enable
Enables the transmitter error interrupts.
0: Transmitter error interrupt disabled
1: Transmitter error interrupt enabled
13 UBOI 0 R/W User Buffer Overrun Interrupt Enable
Enables the user buffer overrun interrupts.
0: User buffer overrun interrupt disabled
1: User buffer overrun interrupt enabled