Section 26 USB 2.0 Host/Function Module
R01UH0134EJ0400 Rev. 4.00 Page 1527 of 2108
Sep 24, 2014
SH7262 Group, SH7264 Group
(d) Control Transfer Auto Response Function
This module automatically responds to a normal SET_ADDRESS request. If any of the following
errors occur in the SET_ADDRESS request, a response is necessary.
(i) bmRequestType H'00
(ii) wIndex H'00
(ii) wLength H'00
(iv) wValue H'7F
(v) DVSQ 011 (Configured)
For all requests other than the SET_ADDRESS request, the corresponding response is required.