Filter
Top Products
Section 1 Overview
R01UH0134EJ0400 Rev. 4.00 Page 5 of 2108
Sep 24, 2014
SH7262 Group, SH7264 Group
Items Specification
Power-down modes
Four power-down modes provided to reduce the power consumption in
this LSI
Sleep mode
Software standby mode
Deep standby mode
Module standby mode
Multi-function timer
pulse unit 2
Maximum 16 lines of pulse inputs/outputs based on fix channels of 16-
bit timers
18 output compare and input capture registers
Input capture function
Pulse output modes
Toggle, PWM, complementary PWM, and reset-synchronized PWM
modes
Synchronization of multiple counters
Complementary PWM output mode
Non-overlapping waveforms output for 3-phase inverter control
Automatic dead time setting
0% to 100% PWM duty value specifiable
A/D converter start request delaying function
Interrupt skipping at crest or trough
Reset-synchronized PWM mode
Three-phase PWM waveforms in positive and negative phases can be
output with a required duty value
Phase counting mode
Two-phase encoder pulse counting available
Compare match timer
Two-channel 16-bit counters
Four types of clock can be selected (P/8, P/32, P/128, and P/512)
DMA transfer request or interrupt request can be issued when a
compare match occurs
Realtime clock
Internal clock, calendar function, alarm function
Interrupts can be generated at intervals of 1/64 s by the 32.768-kHz
on-chip crystal oscillator