Renesas R5S72622 Doll User Manual


  Open as PDF
of 2152
 
Section 20 Controller Area Network
R01UH0134EJ0400 Rev. 4.00 Page 1017 of 2108
Sep 24, 2014
SH7262 Group, SH7264 Group
(4) Interrupt Request Register (IRR)
The interrupt request register (IRR) is a 16-bit read/write-clearable register containing status flags
for the various interrupt sources.
IRR (Address = H'008)
1514131211109876543210Bit:
Initial value:
R/W:
0000000000000001
R/W R/W R/W R/W R/W R/W RRR/W R/W R/W R/W R/W RRR/W
IRR15 IRR14 IRR13 IRR12 IRR11 IRR10 IRR9 IRR8 IRR7 IRR6 IRR5 IRR4 IRR3 IRR2 IRR1 IRR0
Bit 15 — Timer Compare Match Interrupt 1 (IRR15): Indicates that a Compare-Match
condition occurred to the Timer Compare Match Register 1 (TCMR1). When the value set in the
TCMR1 matches to Cycle Time (TCMR1 = CYCTR), this bit is set.
Bit 15: IRR15 Description
0 Timer Compare Match has not occurred to the TCMR1 (Initial value)
[Clearing condition] Writing 1
1 Timer Compare Match has occurred to the TCMR1
[Setting condition] TCMR1 matches to Cycle Time (TCMR1 = CYCTR)
Bit 14 — Timer Compare Match Interrupt 0 (IRR14): Indicates that a Compare-Match
condition occurred to the Timer Compare Match Register 0 (TCMR0). When the value set in the
TCMR0 matches to Local Time (TCMR0 = TCNTR), this bit is set.
Bit 14: IRR14 Description
0 Timer Compare Match has not occurred to the TCMR0 (Initial value)
[Clearing condition] Writing 1
1 Timer Compare Match has occurred to the TCMR0
[Setting condition] TCMR0 matches to the Timer value (TCMR0 = TCNTR)
Bit 13 - Timer Overrun Interrupt/Next_is_Gap Reception Interrupt/Message Error
Interrupt (IRR13): This interrupt assumes a different meaning depending on this module mode.
It indicates that:
The Timer (TCNTR) has overrun when this module is working in event-trigger mode
(including test modes)