Filter
Top Products
A - 3
4. Additional instructions
The following instructions should also be fully noted. Incorrect handling may cause a fault, injury, electric
shock, etc.
(1) Transportation and installation
CAUTION
Transport the products correctly according to their weights.
Use the eye-bolt of the servo motor to only transport the servo motor and do not use it to transport in the
condition to have installed a servo motor on the machine.
Stacking in excess of the specified number of products is not allowed.
Do not carry the servo motor by the cables, shaft or encoder.
Do not hold the front cover to transport the servo amplifier. The servo amplifier may drop.
Install the servo amplifier in a load-bearing place in accordance with the Instruction Manual.
Do not climb or stand on servo equipment. Do not put heavy objects on equipment.
The servo motor must be installed in the specified direction.
Leave specified clearances between the servo amplifier and control enclosure walls or other equipment.
Do not install or operate the servo motor which has been damaged or has any parts missing.
Do not block the intake/exhaust port of the servo motor which has a cooling fan.
Provide adequate protection to prevent screws and other conductive matter, oil and other combustible matter
from entering the servo amplifier and servo motor.
Do not drop or strike servo motor. Isolate from all impact loads.
When you keep or use it, please fulfill the following environmental conditions.
Environment Conditions
[ ] 0 to 40 (non-freezing)
In
Operation
[
] 32 to 104 (non-freezing)
[ ] 15 to 70 (non-freezing)
Ambient
temperature
In Storage
[
] 5 to 158 (non-freezing)
In Operation 80%RH or less (non-condensing)
Ambient
humidity
In Storage 90%RH or less (non-condensing)
Ambience
Indoors (no direct sunlight)
Free from corrosive gas, flammable gas, oil mist, dust and dirt
Altitude Max. 1000m (3280 ft) above sea level
HC-KFS series
HC-MFS series
HC-UFS13 to 73 X,Y:49
HC-SFS81
HC-SFS52 to 152
HC-SFS53 to 153
HC-SFS524 to 1524
HC-RFS series
HC-UFS72
152
X,Y:24.5
HC-SFS121 201
HC-SFS202
352
HC-SFS203
353
HC-SFS2024
3524
HC-UFS202 to 502
X:24.5
Y:49
HC-SFS301
HC-SFS502
702
HC-SFS5024
7024
X:24.5
Y:29.4
HC-AQ series
HC-KF series
HC-MF series
HA-FF series
HC-UF13 to 73
X,Y:19.6
HC-SF81
HC-SF52 to 152
HC-SF53 to 153
HC-RF series
HC-UF72
152
HC-LFS52
to
152
X:9.8
Y:24.5
HC-SF121 201
HC-SF202
352
HC-SF203
353
HC-UF202 to 502
HC-LFS202
302
X:19.6
Y:49
HA-LFS601
to
12K1
HA-LFS701M to
15K1M
HA-LFS502 to 22K2
HA-LFS6014 to 12K14
HA-LFS701M4 to 15K1M4
HA-LFS11K24 to 22K24
HA-LH11K2
to
22K2
HC-SF301
HC-SF502
702
X:11.7
Y:29.4
[m/s
2
]
HA-LFS15K1
to
37K1
HA-LFS22K1M
to
37K1M
HA-LFS30K2
37K2
HA-LFS15K14 to 37K14
HA-LFS22K1M4 to 50K1M4
HA-LFS30K24 to 55K24
HA-LF series X,Y:9.8
HC-KFS series
HC-MFS series
HC-UFS13 to 73 X,Y:161
HC-SFS81
HC-SFS52 to 152
HC-SFS53 to 153
HC-SFS524 to 1524
HC-RFS series
HC-UFS72
152
X,Y:80
(Note) Vibration
[ft/s
2
]
HC-SFS121
201
HC-SFS202
352
HC-SFS203
353
HC-SFS2024
3524
HC-UFS202 to 502
X:80
Y:161