Filter
Top Products
A - 10
CONFORMANCE WITH UL/C-UL STANDARD
Use the UL/C-UL Standard-compliant model of servo motor.
Unless otherwise specified, the handling, performance, specifications, etc. of the UL/C-UL Standard-
compliant models are the same as those of the standard models.
The servo motor is compliant with the UL/C-UL standard when it is mounted on the flanges made of
aluminum whose sizes are indicated in the following table.
The rated torque of the servo motor under the UL/C-UL standard indicates the continuous permissible
torque value that can be generated when it is mounted on the flange specified in this table and used in
the environment of 0
to 40 ambient temperature. Therefore, to conform to the UL/C-UL standard,
mount the servo motor on a flange with a heat radiating effect equivalent to that of this flange.
Servo Motor
Flange Size
[mm]
HC-KF(-UE)
HC-KFS
HC-MF(-UE)
HC-MFS
HA-FF
C
-UE
(Note 2)
HC-SF
HC-SFS
HC-RF
HC-RFS
HC-UF
HC-UFS
HA-LF
HA-LFS
HC-LFS HC-AQ
150 150 3
0135 to
0335
150 150 6 053 13 053 13 053 13 13
250 250 623 23 2333 23
250 250 12 43 43 43 63
81
52 to 152
53 to 153
524 to 1524
103 to 203 43 52 to 152
300 300 12 (Note 1) 73 73 73
300 300 20
121
201
202
352
203
353
2024
3524
202
302
550 550 30 353 503 72 152
650 650 35
301
502 702
5024
7024
202 to 502
601 to 12K1
701M to 15K1M
502 to 22K2
6014 to 12K14
701M4 to 15K1M4
11K24 to 22K24
950 950 35
15K1 to 37K1
22K1M to 37K1M
30K2
37K2
15K14 to 37K14
22K1M4 to
50K1M4
30K24 to 55K24
Note 1. 73 is not available for the HC-KF(-UE) series.
2. 524 to 7024 are not available for the HC-SF series.