Filter
Top Products
FX Series Programmable Controllers
Preparation for Drawing and Basic Options 5
5-40
6) In "New Object Type" on the screen list window,
"Change Screen (by PLC)" is displayed.
7) Click the [Insert] button.
8) The Change Screen (by PLC) dialog box
appears.
9) You can set the bit device condition for screen
changeover.
In this example, click to turn on the radio button
of "Always Change".
10)You can select the method to refer to the
screen No. for screen changeover.
In this example, click to turn on the radio button
of "PLC data register" so that the word device
of the PLC set in "Interface Devices" in the DU/
WIN-E is referred to.
11)Click [OK] to close the dialog box.
Now, the "Change Screen" object is registered.