Filter
Top Products
FX Series Programmable Controllers Preparation for Drawing and Basic Options 5
5-1
5. Preparation for Drawing and Basic Options
This section describes the flow from startup of the DU/WIN software to the drawing procedure.
5.1 Screen creation procedure
When creating the screen, set the common functions, create the user screen, and set other data upon
necessity.
Start up the DU/WIN. Refer to Paragraph 3.1.
When creating the screen newly for the first time
[File] - [New]
When editing the existing screen data file
[File] - [Open]
Select the DU type and the PC connected.
Refer to Paragraph 5.2.2.
Set the control devices. Refer to Paragraph 6.4.10.
Select the file from the list, and read it. Refer to
Paragraph 5.2.3.
Set the common functions valid
while any user screen is dis-
played.
• 25DU, 30DU, 40DU
Set the common keys.
• 40DU-TK
Set the common touch keys.
• 50DU-TK, F940(W)GOT,
F930GOT(-K), F920GOT-K
Create the screen using all
the objects on the common
setting screen.
Create the screen by
setting each object
using the screen
edition function.
Note: The screen No. 0
shall be created in any
case.
Create other data upon necessity.
• Create the library.
Text library (Refer to Paragraph
6.4.2)
Image library (Refer to Paragraph
6.4.3)
• Create the comment. Refer to
Paragraph 6.4.4.
• Create the alarm message. Refer to
Paragraph 6.4.5.
• Create the data file. Refer to
Paragraph 6.4.6.
Transfer the screen data from the personal computer to the DU.The personal computer transfer
mode shall be preliminarily selected in the DU. Refer to Paragraph 6.5.
Save the data often with a short interval. Refer to Paragraph 6.2.1.
Check the data (to confirm that the data set for the screen created is correct). Refer to Paragraph 6.6.1.
Set the common functions. Re-
fer to Section 8.
Create the user screen.
Refer to Section 8.
Create other data. Refer to Section 6.
Display and check the screen.
Change over to the screen mode in the DU, and display the created screen.
(Some functions built in the DU/F940GOT can be displayed and checked in the test mode.)
Screen No.0
1
n