Filter
Top Products
FX Series Programmable Controllers Menu Bar Function 6
6-75
6.7.2 Setting the grid display
The grid can be set to ON/OFF, the suction function can be set to ON/OFF, and the dot-to-dot interval can be
specified.
Description on the display contents and the input areas
1 ) Validness of grid
Sets whether or not the grid is displayed on the Screen window.
2 ) Grid Suction
Sets whether or not the upper left corner (start point) of an object is sucked to a dot of the grid.
(When "Grid Suction" is set to ON, any object is not located between dots.)
3 ) Dot-to-dot Interval (Longitudinal/Lateral)
Sets the dot-to-dot interval in the longitudinal and lateral directions respectively with an increment of 1
dot. (The default setting is 16
×
16.)
6.7.3 Enlarging and diminishing the screen window
The screen window can be enlarged or diminished to the original size.
[Zoom In] Enlarges the current Screen window size by "
×
1" in the longitudinal and lateral directions
respectively (The area becomes four times of the former size.).
[Zoom Out] Diminishes the current Screen window size by "
×
1" in the longitudinal and lateral directions
respectively (The area becomes four times a quarter of the former size.).
1) Validness of grid
2) Grid Suction
3) Dot-to-dot Interval
Zoom Out
×
1
(original size)
Zoom In
Zoom Out Zoom Out
Zoom In Zoom In
×
2
(double size)
×
3
(triple size)
×
*
(
*
-time size)