Filter
Top Products
FX Series Programmable Controllers Preparation for Drawing and Basic Options 5
5-31
5.6.2 Screen No. 1 for screen changeover
This paragraph describes the procedure to set the changeover from the screen No. 1 to the screen No. 2 by
pressing a touch key and display the text "OPERATING".
Example of created screen
Start point (X: 240, Y: 210)
Text Character Size: W:
×
4, H:
×
2
Touch Key Position: X: 240, Y: 210
Size: W: 80, H: 30
Label: Back
Function: Change Screen
Operating procedure (Display the screen window in advance while referring to Paragraph 5.2.)
1) Left-click "Object" on the tool bar.
Point "Text" using the mouse cursor.
When the submenu appears on the right side,
point and left-click "Text".
2) Put the mouse cursor at a desired start point on
the screen window, and right-click it.
The coordinates of the mouse cursor are
displayed as "X:
∗∗
Y:
∗∗
" at the lower right
corner of the DU/WIN-E software window.
(After creating a text, you can move it or
change its size using the Text dialog box or the
mouse.)
(0, 0)
Start point (X: 90, Y: 95)
Submenu
Setting of text is completed.
3) The dialog box appears.
4) The cursor is flickering in the text input area.
5) Input the text to be displayed.
Example: MOVING
6) Set "Character Size" to "W:
×
4", "H:
×
2".
7) Click [OK] to close the dialog box.
%
Paragraph 8.1.1