Filter
Top Products
FX Series Programmable Controllers Menu Bar Function 6
6-61
6.5.3 OS transfer function in the F940GOT
By using the "OS" command, the system program of the F940GOT can be written.
At the time of shipment from factory, the system program is already transferred. So this procedure is not
required.
This function is offered for upgrade of the F940GOT in the future.
[Refer] Specify the disk directory in which the OS (operating system) is located.
When the Refer button is clicked, the Open File dialog box is open as follows.
Description on the input areas and the buttons
File Enter the file name to be read from the keyboard. Or click a desired file name in the
file list.
File Type An extender (*.SYS) indicating the OS file is displayed. Any other type cannot be
selected.
[Write] Executes write by transferring the OS file specified using the Refer button to the F940GOT.
[Settings] Allows to select the RS-232C communication port and the communication speed (baud rate) of
the personal computer.
F940GOT
3) Directory of OS system file
2) Transfer status
1) Progress in data transfer
Select the directory or the drive name to be displayed in the list.
File list display area
File File Type [Open]
Executes read.
[Cancel]
Cancels read.