Filter
Top Products
FX Series Programmable Controllers
Menu Bar Function 6
6-50
To perform the setting equivalent to 6) DU Printer
This setting can be performed in serial communication in the operation environment setting
(offered when the power is turned on while the upper left corner of the screen is pressed and held)
in the DU or the GOT.
%
For the details, refer to the operation manual of the DU.
When this setting is performed, the RS-232C communication connector of the DU is changed over
to the printer connection mode, and communication between the built-in 2-port interface and the
personal computer is disabled. Perform this setting after debugging the PC program.