Filter
Top Products
FX Series Programmable Controllers
Preparation for Drawing and Basic Options 5
5-38
5.6.5 Setting of "Change Screen (by PLC)" object
In order to change over the screen in accordance with the data register (D) specified in "Interface Devices",
you should create the "Change Screen (by PLC)" object on the user screen.
The screen to be created varies depending on the case as follows.
a ) When you would like to always change over the screen by a touch key or the PLC
b ) When you would like to always change over the screen by a touch key, but not like to change over the
screen by the PLC on the user screen
This paragraph describes mainly the setting in the case (a).
The setting procedure for the case (b) is supplemented if the procedure is different.
Example of created screen
The "Change Screen (by PLC)" object is not displayed on the user screen.
Operating procedure (Display the screen window in advance while referring to Paragraph 5.2.)
(To next page)
1) If the screen list window is not displayed, left-click "View/Project" (tool bar)-"Screen List".
Screen list window