Mitsubishi Electronics FX-PCS-DU/WIN-E Model Vehicle User Manual


 
FX Series Programmable Controllers Menu Bar Function 6
6-45
*1 In the general-purpose communication, the baud rate, etc. can be set by selecting "System
Settings“ and “DU Printer” in accordance with the communication specifications of the micro
computer board, etc.
*2 The setting is valid only when the DU model is set to F940GOT.
The setting is available in the DU/WIN V2.0 and later versions.
d) Buzzer
Set whether the buzzer built in the DU is to sound or not.
When the buzzer is set to OFF
The buzzer specified by selecting “Indicator” and “Buzzer” or using the touch keys does not sound.
e) PLC Station No. ("Station No." is displayed in any version former than Ver. 2.50.)
Set the station No. set in the connected equipment (PLC).
The setting rage is from 0 to 31.
(The allowable setting range is actually restricted by the connected equipment.)
f) GOT Station No.
This item cannot be set currently.
g) Handy GOT Setting
For the details, refer to the manual of the handy GOT.
i)Pressed writing
Data is written to the control bit device M+7 (the 8th bit) in accordance with the grip switch ON/
OFF status.
ii)Switch OFF operation
Set the touch switch pressed status valid or invalid when the grip switch is set to OFF from ON.
iii)LED operation
Select the control method for lighting of the GRIP SW LED provided on the panel face.
6 ) DU Printer
The data on alarm, sampling trace, etc. can be printed out using the printer connected to the DU via the
serial communication (RS-232C). This item sets the serial communication.
Make sure to refer to “Note” below for the 50DU-TK.
Setting of the representative printers
(
For other printers, set the required items while referring to the specifications described in the manual of
the printer used.)
Table:6.12
Set item
Communication Setting
([ ] = Initial Value)
Printer Model Name
GT-10A K6PR(-K) A7(N)PR ESC/P ESC/P
Speed
[300],600,1200,2400,
4800,9600,19200
2400 2400 9600 2400 9600
Data bits
[7bit],8bit 8bit 8bit 8bit 8bit 8bit
Stop bits
[1bit],2bit 1bit 1bit 1bit 1bit 1bit
Parity
[Even], Odd Or None Even Even Even Even Even
Handshake
[DTR/DSR],xon/xoff DTR/DSR DTR/DSR DTR/DSR DTR/DSR DTR/DSR
This item is not available.
Stop bits
Parity
Data bits
Handshake
Speed (baud rate)