Filter
Top Products
FX Series Programmable Controllers Related Information 9
9-17
The station No. can be specified in the following two methods.
Station No. specification (direct) : When setting devices, specify the station No. of the inverter.
Allowable setting range: 0 to 31
Station No. specification (indirect): When setting devices, the station No. of the inverter can be indirectly
set using hexadecimal registers (GD100 to GD115) inside the GOT.
Two or more inverters can be changed on one screen.
Allowable setting range: 100 to 115
(* This range corresponds to devices GD100 to GD115).
6 ) FLEX-PC N Series PLC manufactured by Fuji Denki
7 ) SYSMAC C Series PLC manufactured by OMRON
Table 9.22:
Device name
Allowable setting
monitor range
Device No.
expression
Bit device
Input relay (X) X0 to X7FF
Hexadecimal
Output relay (Y) Y0 to Y7FF
Internal relay (M) M0 to M1FFF
Latch relay (L) L0 to L1FFF
State (S) S0 to S7FF
Special internal relay (M) M8000 to M81FF
Word device
Timer (T) T0 to T3FF
Counter (C) C0 to C1FF
Data register (D) D0 to D2FFF
Special data register (D) D8000 to D81FF
Link register (W) W0 to W3FFF
File register (R) R0 to R3FFF
Table 9.23:
Device name
Allowable setting
monitor range
Device No.
expression
Bit device
I/O relay
. .0000 to 51115
Decimal
Internal auxiliary relay
Data link relay (LR) L0000 to L6315
Auxiliary storage relay (A) A0000 to A2715
Hold relay (H) H0000 to H9915
Timer contact (T) T000 to T511
Counter contact (C) C000 to C511
Word device
Data memory (D) D0000 to D9999
Timer (current value) (T) T000 to T511
Counter (current value) (C) C000 to C511
Screen of GOT-F900
Station No. ###
Program operation ###
Parameter ###
"GD100" is set.
"##" indicates the number setting.
PG0:100
Pr0:100
They indicate "GD100".