Filter
Top Products
FX Series Programmable Controllers
Menu Bar Function 6
6-42
6.4.11 Arranging the DU operation environment by the system setting
The following submenu is offered by “System Settings“so that the DU operation environment can be set.
Correspondence table between DU model and system setting
The F930GOT-K is same as the F930GOT shown in the table above.
Commands on submenu
1 ) Project settings
Set the DU type, the PLC and the DU language.
The DU type, etc. already set as the DU screen data can be modified here.
By this function, the data of the current DU can be converted and used for another DU. However, the
data of the 10DU cannot be converted for another DU, and the data of another DU cannot be converted
for the 10DU.
2 ) Interface Devices
Set the head device to specify changeover of the screen, monitor the screen No. displayed in the DU,
and transfer the information such as battery reduction of the DU, cascading of screens, etc. from the PC.
Table:6.10
"
: Can be set
: Cannot be set
System setting 10DU 25DU 30DU 40DU 40DU-TK 50DU-TK
F940W
GOT
F940
GOT
F930
GOT
F920
GOT-K
1) Project Settings
"""" " "
V2.5~
"" "
2) Interface Devices
""" " "
V2.5~
"" "
3) Date/Time Format
""" " "
V2.5~
"" "
4) Entry Code
"" " "
V2.5~
"" "
5) Setup Data
"
V2.5~
"" "
6) DU Printer
"" " "
V2.5~
""
7) DU Menu Key
"
V2.5~
""
8) Bar Code Settings
V2.5~ V2.2~ V2.3~
9) Status Observation
V2.5~ V2.5~ V2.5~
"
10) Color Settings
V2.5~ V2.5~ V2.5~
Submenu
1) Project Settings
2) Interface Devices
3) Date/Time Format
4) Entry Code
6) DU Printer
5) Setup Data
7) DU Menu Key
System setting menu
8) Bar Code Settings
9) Status Observation
10) Color Settings
a) Word device
b) Bit device