Filter
Top Products
FX Series Programmable Controllers
Menu Bar Function 6
6-16
When an object is deleted by selection of "Edit" and "Cut", it is copied on the clip board. When it is deleted
by pressing of the [Delete] key, it is not copied on the clip board.
Table:6.3 Relationship between commands and shortcut keys
Command Shortcut keys
Edit - Cut [Ctrl] key + [X] key
Edit - Copy [Ctrl] key + [C] key
Edit - Paste [Ctrl] key + [V] key
Make the copy destination window active.
Paste the object to the copy destination.
The following two methods are available to
execute paste. Perform either one.
1. Select "Edit" and "Paste" on the menu
bar.
2. Press the [Ctrl] and [V] keys at the same
time.
Paste
Data flow during transfer and copy
• When an object is transferred or copied, it is registered on the Windows clip board at first, then
pasted as shown in the figure below.
Source screen
Character string A
Character string B
[Cut]
[Copy]
Source screen after execution
Delete
Clip board
[Paste]
[Paste]
Different screen
Copy
Character string B
Character string A
Character string B
Character string A
Character string B