Filter
Top Products
FX Series Programmable Controllers Menu Bar Function 6
6-15
Copy
This paragraph describes respectively the operating procedures to select an object on the screen being
edited (copy source), copy it on the same screen, or copy it to another screen in the same file or a screen in a
different file (project).
Copy (copy and paste) procedure
Screen No. 0
Object
Same screen or
another screen
Screen No. 0 or another
Object
Copied
Copied on the
clip board
Pasted
screen
Click to select an object to be copied (text "DATA"
in this example).
When an object is selected, square marks are
displayed at its four corners.
Copy
Copy the object to be copied to the clip board.
The following two methods are available to
execute copy. Perform either one.
1. Select "Edit" and "Copy" on the tool bar.
2. Press the [Ctrl] and [C] keys at the same time.
Transfer to another screen or screen data
Copy on the same screen