Filter
Top Products
FX Series Programmable Controllers
Installation 2
2-4
2.4 Installation (setup)
The following three methods are available to install the software DU/WIN to the Windows.
In this manual, the general method a) is adopted.
a ) Select “Start” and “Save As”, enter the setup file name, then execute installation.
b ) Display the floppy disk file list from the drive offered by “My Computer”, then execute the
SETUP.EXE.
c ) Select “My Computer”, “Control panel” and “Add/Remove Programs”, then execute installation.
It is recommended to make the backup of the system disk before starting installation.
2.4.1 Starting up the setup program
It is supposed that the Windows is running.
1 ) Insert the system disk 1 into the floppy disk drive.
2 ) Click “Start” of the Windows. Place the cursor on “Save As” on the menu, and click the mouse for
execution.
3 ) Enter the drive name, colon (:) and the yen mark (\) in this order. Enter the setup file name “SETUP”.
The drive name varies depending on the model of the personal computer, the drive connected, etc. as
follows.
The first floppy disk drive is fixed to “Drive A”, and the second floppy disk drive is fixed to “Drive B”.
When the floppy disk drive used is “Drive A”, enter “a:\setup”.
4 ) Click the OK button or press the Enter key.
The installer is started up. Perform the operation in accordance with the instruction displayed in the
dialog box.
For example, in the case of “User information”, make sure to enter both the name and the company
name, then click the Next button.
When installation is finished, the FXDU icon is registered in the start menu program.
When setup is completed, proceed to “3. Starting up and Terminating the Program”.