Filter
Top Products
FX Series Programmable Controllers
Preparation for Drawing and Basic Options 5
5-8
5.2.4 Readable files
This paragraph describes how to read a file saving the drawing data (GDT format) created by the DOS
version software of the FX-PCS-DU/AT-EE (English version for PC-AT personal computer) or a file saving the
screen data (DUP format) of this software.
By selecting “File” and “Open“, the file list display window is displayed.
By selecting “File Type”, the drawing data in accordance with the file format shown in the table below can be
selected and read.
Readable file formats
Caution on reading an ITH file
When reading a file saved in the ITH (Intel HEX) format, check whether the project setting (DU type) selected
at the time of save is the GOT Series or the DU series, then select the Series in which the model used for
save is included.
For example, when reading a file of the screen data of the F930GOT saved in the ITH format, select "GOT
(F930GOT)" as the DU type in "New".
Caution on reading a GDT file
A file saved in the GDT format was able to be read only when it was data of the data access unit (DU Series).
From Ver. 2.5, data of the graphic operation terminal (GOT-F900 Series) can be read also (as far as it is
saved using the DU/WIN-E). (Data saved using the DOS version software cannot be read.)
Table:5.2
File format (extender) Data type
DUP File saved by the DU/WIN (this software)
DUA File saved in the text format by the DU/WIN (this software)
ITH File saved in the Intel hex format (ROM writer)
GDT File created by the DOS version drawing software