Filter
Top Products
FX Series Programmable Controllers Menu Bar Function 6
6-59
[Communication Set]
Changes over to the serial communication (RS-232C interface) port in the personal computer connected to
the DU.
%
For the details, refer to “6.5.4 Changing over the port for communication setup”.
Description on the display contents and the entry area
1 ) Progress in data transfer
Indicates the progress in data transfer as the bar graph.
The progress in transfer can be seen because the graph becomes longer as the data capacity
transferred increases.
2 ) Transfer status
Indicates the transfer status by displaying “Writing”, “Reading”, “Verifying” or “Waiting”.
3 ) Send Options
Sets whether or not correctness of the screen data created is checked before it is transferred (written) to
the DU.
To perform the screen data check, click this item to display the check mark “
"
” to the check box.
%
The contents of this check are equivalent to those of the check offered by “Other”-”Project Check” on
the tool menu.
4 ) Receive Options
Among the screen data saved in the memory built in the DU, the data acquired by sampling and the
alarm data (history and frequency) saved in the alarm setting, the data selected exclusively can be read
to the personal computer.
Click the data to be read among “Screen data”, “Sampling result”, “Alarm history” and “Alarm frequency”
so that the check mark “
"
” is displayed in the check box, then click the Read button.
In the F940GOT, all of the user screens (all of them at a time) or the specified range of the specified user
screens can be read.For the screen No. specification procedure, refer to (i) below.
5 ) Send Options
The screen data, the text library, the image library, etc. created using the DU/WIN software (personal
computer) can be written to the DU or the F940GOT.
In any unit other than the F940GOT, all data is written at a time. In the F940GOT, all of the user screens
(all of them at a time) or the specified range of the specified user screens can be written.
For the screen No. specification procedure, refer to (i) below
6 ) Test Project After Receive
%
Paragraph 5.2.2
Sets whether or not correctness of the screen data created is checked after it is transferred (read) to the
DU.
To perform the screen data check, click this item using the mouse to display the check mark " " to the
check box.
%
The contents of this check are equivalent to those of the check offered by selection of "Other" and
"Project Check" on the tool menu.