Filter
Top Products
FX Series Programmable Controllers
Menu Bar Function 6
6-48
"Setting of condition and operation" screen
a) Condition
Set the condition to execute writing/operation.
Only bit devices can be set here.
"Bit Device 1" should be set in any case.
"Bit Device 2" can be set if necessary. When setting "Bit Device 2", check the check box.
"ON" and "OFF" function as the trigger for the device specified by "Bit Device 1/2". Select "ON" or
"OFF".
b) Operation Setting
Set the operation to be executed when the specified condition is established.
i)Operation
Among the following types of write operations, only one type can be set for one condition.
Only while the condition is established, a bit device is ON (Bit MOMENTARY).
- A bit device is set to ON (Bit SET).
- A bit device is set to OFF (Bit RST).
- The current status of a bit device is reversed (ON
→
OFF or OFF
→
ON) (Bit ALT).
- Data is written to a word device (Data SET 16bit).
- Data is written to a word device (Data SET 32bit).
ii)Writing Element
Set the device which operates when the condition is established.
iii)Point
Set the number of "Writing Elements".
The following number of points can be set.
- Bit device: 1 to 40 points
- Signed or unsigned 16-bit device: 1 to 20 points
- Signed or unsigned 32-bit device: 1 to 10 points
iv)Fixed Value
Set the fixed value to be written to "Writing Element".
This item can be set when "Operation" is set to "Data SET 16/32bit".
v)Indirect Word Device
"Fixed Value" added by the current value of "Indirect Word Device" is written to "Writing Element".
This item can be set when "Operation" is set to "Data SET 16/32bit".
When setting this item, check the check box.
vi)Word transfer mode (FMOV or BMOV)
When "Operation" is set to "Data SET 16/32bit", two or more points are set to "Point", and the
current value of "Indirect Word Device" added by "Fixed Value" is written to "Writing Element", the
following setting is available.