Filter
Top Products
FX Series Programmable Controllers Menu Bar Function 6
6-63
6.5.4 Changing over the port for communication setup
The “Communication Setup” command allows to select one among the port Nos. assigned to the serial
communication connectors in the personal computer connected to the DU.
If the port No. of the serial communication connector connected to the DU is not equivalent to the setting, an
error occurs and transfer is disabled.
[OK] Saves the modification entered (current setting), and closes the dialog box.
[Cancel] Cancels the modification entered, and closes the dialog box.
Description on the entry area
1 ) Port
When two or more serial communication (RS-232C interface) ports (COM) are provided as standard in
the personal computer, the port No. to be connected to the DU should be selected here. Click the drop-
down type port button, and select one among COM1 to COM4.
2 ) Baud Rate
Sets the communication speed (baud rate) between the F940GOT and the personal computer to the
speed available in the personal computer.
Available speeds are 9,600, 19,200 and 38,400 bps.
1) Port
10DU, 25DU, 30DU, 40DU, 40DU-TK and 50DU-TK
F940GOT
1) Port
2) Baud Rate