Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
sgcp request timeout
VR-637
Cisco IOS Voice, Video, Fax Command Reference
sgcp request timeout
To specify how long the system should wait for a response to a request, use the sgcp request timeout
command in global configuration mode. To restore the default value, use the no form of this command.
sgcp request timeout timeout
no sgcp request timeout
Syntax Description
Defaults 500 milliseconds
Command Modes Global configuration
Command History
Usage Guidelines This command is used for “notify” and “delete” messages, which are sent to the SGCP call agent.
Examples The following example shows the system configured to wait 40 milliseconds for a reply to a request:
sgcp request timeout 40
Related Commands
timeout Specifies the number of milliseconds to wait for a response to a request.
Valid range is from 1 to 10,000.
Release Modification
12.0(5)T This command was introduced in a private release on the Cisco AS5300
universal access server only and was not generally available.
12.0(7)XK Support for this command was extended to the Cisco MC3810
multiservice concentrator and the Cisco 3600 series routers (except for
the Cisco 3620) in a private release that was not generally available.
12.1(2)T This command was integrated into 12.1(2)T and was generally available
on the Cisco 3600 series router and the Cisco MC3810 multiservice
concentrator
Command Description
sgcp Starts and allocates resources for the SGCP daemon.
sgcp call-agent Defines the IP address of the default SGCP call agent.
sgcp graceful-shutdown Gracefully terminates all SGCP activity.
sgcp max-waiting-delay Sets the SGCP maximum waiting delay to prevent restart avalanches.
sgcp modem passthru Enables SGCP modem or fax pass-through.
sgcp quarantine-buffer
disable
Disables the SGCP quarantine buffer.