Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show mgcp connection
VR-745
Cisco IOS Voice, Video, Fax Command Reference
show mgcp connection
To display Media Gateway Control Protocol (MGCP) configuration information, use the show mgcp
connection command in EXEC mode.
show mgcp connection
Syntax Description
Defaults No defaults
Command Modes EXEC
Command History
Examples Following is an example of an MGCP configuration displaying active MGCP-controlled connections.
Router# show mgcp connection
Endpoint Call_ID(C) Conn_ID(I) (P)ort (M)ode (S)tate (C)odec (E)vent[SIFL] (R)esult[EA]
1. S0/DS1-0/1 C=103,23,24 I=0x8 P=16586,16634 M=3 S=4,4 C=5 E=2,0,0,2 R=0,0
2. S0/DS1-0/2 C=103,25,26 I=0x9 P=16634,16586 M=3 S=4,4 C=5 E=0,0,0,0 R=0,0
3. S0/DS1-0/3 C=101,15,16 I=0x4 P=16506,16544 M=3 S=4,4 C=5 E=2,0,0,2 R=0,0
4. S0/DS1-0/4 C=101,17,18 I=0x5 P=16544,16506 M=3 S=4,4 C=5 E=0,0,0,0 R=0,0
5. S0/DS1-0/5 C=102,19,20 I=0,6 P=16572,16600 M=3 S=4,4 C=5 E=2,0,0,2 R=0,0
6. S0/DS1-0/6 C=102,21,22 I=0x7 P=16600,16572 M=3 S=4,4 C=5 E=0,0,0,0 R=0,0
Total number of active calls 6
Table 47 describes the significant fields shown in the display.
connection Displays the active MGCP-controlled connections.
Release Modification
12.1(1)T This command was introduced for the Cisco AS5300 universal
access server.
12.1(3)T Output was updated to show additional gateway and platform
information.
Table 47 show mgcp connection Field Descriptions
Endpoint The endpoint for each call shown in the digital endpoint naming
convention of slot number (S0) and digital line (DS1-0) number (1).
Call_ID(C) The MGCP call ID sent by the call agent, the internal Call Control
Application Programming Interface (CCAPI) call ID for this
endpoint, and the peer call legs CCAPI call ID.
(CCAPI is an API that provides call control facilities to applications.)
Conn_ID(I) The connection ID generated by the gateway and sent in the ACK
message.