Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
roaming (settlement)
VR-585
Cisco IOS Voice, Video, Fax Command Reference
roaming (settlement)
To enable the roaming capability for a settlement provider, use the roaming command in settlement
configuration mode. To disable the roaming capability, use the no form of this command.
roaming
no roaming
Syntax Description This command has no arguments or keywords.
Defaults No roaming
Command Modes Settlement configuration
Command History
Usage Guidelines Enable roaming capability of a settlement provider if that provider can authenticate a roaming user and
route roaming calls.
A roaming call is successful only if both the settlement provider and the outbound dial peer for that call
are roaming-enabled.
Examples The following example enables the roaming capability for the settlement provider:
settlement 0
roaming
Related Commands
Release Modification
12.1(1)T This command was introduced on the Cisco 2600 series and Cisco 3600
series routers and on the Cisco AS5300 universal access server.
Command Description
roaming (dial-peer mode) Enables the roaming capability for the dial peer.
settle-call Limits the dial peer to using only the specific clearinghouse identified
by the specified provider-number.
settlement roam-pattern Configures a pattern to match against when determining roaming.