Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show voice call
VR-826
Cisco IOS Voice, Video, Fax Command Reference
The show voice call command provides the status at these levels of the call handling module:
• Tandem switch
• End-to-end call manager
• Call processing state machine
• Protocol state machine
Examples The following is a sample display from the show voice call summary command for voice ports on a
Cisco MC3810 multiservice concentrator, showing two local calls connected without local bypass:
PORT CODEC VAD VTSP STATE VPM STATE
======= ======== === ===================== ========================
0:17.18 *shutdown*
0:18.19 g729ar8 n S_CONNECT FXOLS_OFFHOOK
0:19.20 FXOLS_ONHOOK
0:20.21 FXOLS_ONHOOK
0:21.22 FXOLS_ONHOOK
0:22.23 FXOLS_ONHOOK
0:23.24 EM_ONHOOK
1/1 FXSLS_ONHOOK
1/2 FXSLS_ONHOOK
1/3 EM_ONHOOK
1/4 EM_ONHOOK
1/5 FXOLS_ONHOOK
1/6 g729ar8 n S_CONNECT FXOLS_CONNECT
The following is a sample display from the show voice call summary command for voice ports on a
Cisco MC3810 multiservice concentrator, showing two local calls connected with local bypass:
PORT CODEC VAD VTSP STATE VPM STATE
======= ======== === ===================== ========================
0:17.18 *shutdown*
0:18.19 S_CONNECT FXOLS_OFFHOOK
0:19.20 FXOLS_ONHOOK
0:20.21 FXOLS_ONHOOK
0:21.22 FXOLS_ONHOOK
0:22.23 FXOLS_ONHOOK
0:23.24 EM_ONHOOK
1/1 FXSLS_ONHOOK
1/2 FXSLS_ONHOOK
1/3 EM_ONHOOK
1/4 EM_ONHOOK
1/5 FXOLS_ONHOOK
1/6 S_CONNECT FXOLS_CONNECT
The following is a sample display from the show voice call command for analog voice ports on a
Cisco MC3810 multiservice concentrator:
1/1 vpm level 1 state = FXSLS_ONHOOK
vpm level 0 state = S_UP
1/2 vpm level 1 state = FXSLS_ONHOOK
vpm level 0 state = S_UP
1/3 is shutdown
1/4 vtsp level 0 state = S_CONNECT
vpm level 1 state = S_TRUNKED
vpm level 0 state = S_UP
1/5 vpm level 1 state = EM_ONHOOK
vpm level 0 state = S_UP
1/6 vpm level 1 state = EM_ONHOOK
vpm level 0 state = S_UP