Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show voice trunk-conditioning signaling
VR-845
Cisco IOS Voice, Video, Fax Command Reference
show voice trunk-conditioning signaling
To display the status of trunk-conditioning signaling and timing parameters for a voice port, use the
show voice trunk-conditioning signaling command in user EXEC or privileged EXEC mode.
show voice trunk-conditioning signaling [summary | voice-port]
Syntax Description
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines The show voice trunk-conditioning signaling command displays the trunk signaling status for analog
and digital voice ports on Cisco MC3810 multiservice concentrators and Cisco 2600 and 3600 series
routers.
Examples The following is a sample display from the show voice trunk-conditioning signaling summary
command for voice ports on a Cisco MC3810 multiservice concentrator:
Router# show voice trunk-conditioning signaling summary
1/1 is shutdown
1/4 is shutdown
1/5 :
TX INFO :slow-mode seq#= 25, sig pkt cnt= 40, last-ABCD=0000
hardware-state ACTIVE signal type is NorthamericanCAS signal path is OPEN
RX INFO :slow-mode, sig pkt cnt= 36, prev-seq#= 25, last-ABCD=0000
The following is a sample display from the show voice trunk-conditioning signaling command for
voice port 1/5 on a Cisco MC3810 multiservice concentrator:
Router# show voice trunk-conditioning signaling 1/5
1/5 :
summary (Optional) Displays a summary of the status for all voice ports
on the router or concentrator.
voice-port (Optional) Displays a detailed report for a specified voice port.
Release Modification
12.0(3)XG This command was introduced on the Cisco MC3810
multiservice concentrator as show voice permanent-call.
12.0(4)T This command was integrated into the 12.0(4)T release.
12.0(7)XK This command was renamed show voice trunk-conditioning
signaling.
12.1(2)T This command was integrated into the 12.1(2)T release.
12.1(3)T This command was first supported on the Cisco 2600 and 3600
series routers.