Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
session protocol aal2
VR-605
Cisco IOS Voice, Video, Fax Command Reference
session protocol aal2
To enter the voice-service-session configuration mode and specify AAL2 trunking on a Cisco MC3810
multiservice concentrator, use the session protocol aal2 command in voice-service configuration mode.
session protocol aal2
Syntax Description This command has no keywords or arguments.
Defaults There is no default setting for this command.
Command Modes Voice-service configuration
Command History
Usage Guidelines This command applies to VoATM on the MC3810 multiservice concentrator.
In the voice-service-session configuration mode for AAL2, you can configure only AAL2 features, such
as call admission control and subcell multiplexing.
Examples The following example shows how to access the voice-service-session configuration mode, beginning in
global configuration mode:
voice service voatm
session protocol aal2
Release Modification
12.1(1)XA This command was introduced on the Cisco MC3810 multiservice
concentrator.
12.1(2)T This command was integrated into the 12.1(2)T release.