Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show call rsvp-sync conf
VR-684
Cisco IOS Voice, Video, Fax Command Reference
show call rsvp-sync conf
To display the configuration settings for Resource Reservation Protocol (RSVP) synchronization, use the
show call rsvp-sync conf command in privileged EXEC mode.
show call rsvp-sync conf
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes Privileged EXEC
Command History
Examples The following example shows sample output from the show call rsvp-sync conf command:
Router# show call rsvp-sync conf
VoIP QoS: RSVP/Voice Signaling Synchronization config:
Overture Synchronization is ON
Reservation Timer is set to 10 seconds
Table 31 describes the significant fields shown in the display
Release Modification
12.1(3)XI1 This command was introduced on the Cisco 2600 series,
Cisco 3600 series, and Cisco 7200 series routers, the
Cisco MC3810 multiservice concentrator, and on the
Cisco AS5300 and Cisco AS5800 universal access servers.
12.1(5)T This command was integrated into
Cisco IOS Release 12.1(5)T.
Table 31 show call rsvp-sync conf Field Descriptions
Field Description
Overture Synchronization is ON Indicates whether RSVP synchronization is enabled.
Reservation Timer is set to xx seconds Number of seconds for which the RSVP reservation timer is
configured.