Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
reset
VR-566
Cisco IOS Voice, Video, Fax Command Reference
reset
To reset a set of digital signal processors (DSPs), use the reset command in global configuration mode.
reset number
Syntax Description
Defaults No default behavior or values.
Command Modes Global configuration
Command History
Examples The following example displays the reset command configuration for DSP 1:
reset 1
01:24:54:%DSPRM-5-UPDOWN: DSP 1 in slot 1, changed state to up
number Specifies the number of DSPs to be reset. The number of DSPs ranges
from 0 to 30.
12.0(5)XE This command was introduced on the Cisco 7200 series routers.
12.0(7)T This command was integrated into the Cisco IOS Release 12.0(7)T.