Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show proxy h323 detail-call
VR-759
Cisco IOS Voice, Video, Fax Command Reference
show proxy h323 detail-call
To display the details of a particular call on a proxy, use the show proxy h323 detail-call command in
privileged EXEC mode.
show proxy h323 detail-call call-key
Syntax Description
Defaults No default behavior or values.
Command Modes Privileged EXEC
Command History
Usage Guidelines The show proxy h323 detail-call command can be used with or without the proxy statistics enabled.
Examples The following is sample output from the show proxy h323 detail-call command without the proxy
statistics enabled:
Router# show proxy h323 detail-call 1
ConferenceID = [277B87C0A283D111B63E00609704D8EA]
Calling endpoint aliases:
H323_ID: ptel11@zone1.com
Called endpoint aliases:
H323_ID: ptel21@zone2.com
Peer proxy call signalling address = 55.0.0.41
Time call was initiated = 731146290 ms
Inbound CRV = 144
Outbound CRV = 70
Call state = Media Streaming
H245 logical channels for call leg pte111@zone1.com<->px1@zone.com
Channel number = 2
Type = VIDEO
State = OPEN
Bandwidth = 374 kbps
Time created = 731146317 ms
Channel number = 1
Type = AUDIO
State = OPEN
Bandwidth = 81 kbps
Time created = 731146316 ms
Channel number = 2
Type = VIDEO
State = OPEN
call-key Specifies the call you want to display. The call-key argument is derived from
the show proxy h323 calls display.
Release Modification
11.3(2)NA This command was introduced.
12.0(3)T The command was integrated into Cisco IOS Release 12.0(3)T and
supported on the Cisco MC3810 multiservice concentrator.