Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show frame-relay vofr
VR-719
Cisco IOS Voice, Video, Fax Command Reference
show frame-relay vofr
To display information about the FRF.11 subchannels being used on Voice over Frame Relay (VoFR)
data link connection identifiers (DLCIs), use the show frame-relay vofr command in privileged EXEC
mode.
show frame-relay vofr [interface [dlci [cid]]]
Syntax Description
Defaults No default behavior or values.
Command Modes Privileged EXEC
Command History
Usage Guidelines If this command is entered without a specified interface, FRF.11 subchannel information will be
displayed for all VoFR interfaces and DLCIs configured on the router.
Note This command is currently not supported on the Cisco MC3810 multiservice concentrator for PVCs
configured with the vofr cisco command or the frame-relay interface-dlci voice-encap command.
Examples The following is sample output from the show frame-relay vofr command when an interface is not
specified:
Router# show frame-relay vofr
interface vofr-type dlci cid cid-type
Serial0/0.1 VoFR 16 4 data
Serial0/0.1 VoFR 16 5 call-control
Serial0/0.1 VoFR 16 10 voice
Serial0/1.1 VoFR cisco 17 4 data
interface (Optional) The specific interface type and number for which you wish
to display FRF.11 subchannel information.
dlci (Optional) The specific data link connection identifier for which you
wish to display FRF.11 subchannel information.
cid (Optional) The specific subchannel for which you wish to display
information.
Release Modification
12.0(4)T This command was introduced on the Cisco 2600 series and Cisco 3600
series routers and on the Cisco MC3810 multiservice concentrator.
12.0(4)T This command was integrated in Cisco IOS Release 12.0(4)T.