Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show dial-peer voice
VR-710
Cisco IOS Voice, Video, Fax Command Reference
Successful Calls = 0, Failed Calls = 0
Accepted Calls = 0, Refused Calls = 0
Last Disconnect Cause is “”
Last Disconnect Text is “”
Last Setup Time = 0
The following is sample output from the show dial-peer voice command for a VoIP dial peer:
Router# show dial-peer voice 10
VoiceOverIpPeer10
tag = 10, dest-pat = `',
incall-number = `+14087',
group = 0, Admin state is up, Operation state is down
Permission is Answer,
type = voip, session-target = `',
sess-proto = cisco, req-qos = bestEffort,
acc-qos = bestEffort,
fax-rate = voice, codec = g729r8,
Expect factor = 10,Icpif = 30, VAD = disabled, Poor QOV Trap = disabled,
Connect Time = 0, Charged Units = 0
Successful Calls = 0, Failed Calls = 0
Accepted Calls = 0, Refused Calls = 0
Last Disconnect Cause is “”
Last Disconnect Text is “”
Last Setup Time = 0
Table 35 provides an alphabetical listing of the show dial-peer voice output fields and a description of
each field.
Table 35 show dial-peer voice Field Descriptions
Field Description
Accepted Calls Number of calls accepted from this peer since system startup.
acc-qos Lowest acceptable quality of service configured for calls for this peer.
Admin state Administrative state of this peer.
answer-address Answer address configured for this dial peer.
Charged Units Total number of charging units applying to this peer since system
startup. The unit of measure for this field in hundredths of a second.
codec Default voice coder rate of speech for this peer.
Connect Time Accumulated connect time to the peer since system startup for both
incoming and outgoing calls. The unit of measure for this field is in hun-
dredths of a second.
dest-pat Destination pattern (telephone number) for this peer.
DTMF Relay Indicates whether or not dual-tone multifrequency (DTMF) relay has
been enabled, by using the dtmf-relay command, for this dial peer.
Expect factor User-requested Expectation Factor of voice quality for calls through this
peer.
fax-rate Fax transmission rate configured for this peer.
Failed Calls Number of failed call attempts to this peer since system startup.
group Group number associated with this peer.