Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show settlement
VR-786
Cisco IOS Voice, Video, Fax Command Reference
The following example shows transaction and state information about a specific settlement server:
Router# show settlement 0 transactions
Transaction ID=8796304133625270342
state=OSPC_GET_DEST_SUCCESS, index=0
callingNumber=5710868, calledNumber=15125551212
Table 54 describes the significant fields shown in the display. The provider attributes not configured are
not shown.
.
Related Commands
Table 54 show settlement Field Descriptions
Field Description
type Settlement provider type.
address url URL address of the provider.
encryption SSL encryption method.
max-connections Maximum number of concurrent connections to provider.
connection-timeout Connection timeout with provider (in seconds).
response-timeout Response timeout with provider (in seconds).
retry-delay Delay time between retries (in seconds).
retry-limit Number of retries.
session-timeout SSL session timeout (in seconds).
customer-id Customer ID, assigned by provider.
device-id Device ID, assigned by provider.
roaming Roaming enabled.
signed-token Indicates if the settlement token is signed by the server.
Command Description
connection-timeout Configures the time that a connection is maintained after a
communication exchange is completed.
customer-id Identifies a carrier or ISP with a settlement provider.
device-id Specifies a gateway associated with a settlement provider.
encryption Sets the encryption method to be negotiated with the provider.
max-connection Sets the maximum number of simultaneous connections to be used
for communication with a settlement provider.
response-timeout Configures the maximum time to wait for a response from a server.
retry-delay Sets the time between attempts to connect with the settlement
provider.
session-timeout Sets the interval for closing the connection when there is no input
or output traffic.
settlement Enters settlement configuration mode and specifies the attributes
specific to a settlement provider.
type Configures an SAA-RTR operation type.