Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show rlm group status
VR-771
Cisco IOS Voice, Video, Fax Command Reference
Related Commands
socket The status of the individual signaling link.
Server Link Group[r2-server] The status of all signaling links configured under a particular
RLM server link group (r2-server).
Table 52 show rlm group status Field Descriptions (continued)
Field Description
Command Description
clear interface Resets the hardware logic on an interface.
clear rlm group Clears all RLM group time stamps to zero.
interface Defines the IP addresses of the server, configures an interface
type, and enters interface configuration mode.
link (RLM) Specifies the link preference.
protocol rlm port Reconfigures the port number for the basic RLM connection for
the whole rlm-group.
retry keepalive Allows consecutive keepalive failures a certain amount of time
before the link is declared down.
server (RLM) Defines the IP addresses of the server.
show rlm group status Displays the status of the RLM group.
show rlm group timer Displays the current RLM group timer values.
shutdown (RLM) Shuts down all of the links under the RLM group.
timer Overwrites the default setting of timeout values.