Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show ss7 mtp2 variant
VR-806
Cisco IOS Voice, Video, Fax Command Reference
show ss7 mtp2 variant
To display information about the SS7 MTP 2 protocol variant, use the show ss7 mtp2 variant command
in privileged EXEC mode.
show ss7 mtp2 variant [channel]
Syntax Description
Defaults If you do not specify a channel, the command shows protocol information for channel 0.
Command Modes Privileged EXEC
Command History
Usage Guidelines Each country specifies its own variant of SS7, and the Cisco SLT supports several variants of the MTP 2
protocol. The selected variant can affect the MTP 2 statistics displayed by various commands. The Cisco
SLT support the following variants:
• Telcordia Technologies (formerly Bellcore)
• ITU
• NTT (Japan)
• TTC (Japan Telecom)
Each channel can be configured to any one of the protocol variants. When you change from one variant
to another, for example from Bellcore to NTT, the MTP 2 parameters default to those specified by NTT.
You can then change the defaults as required.
Examples The following example shows how to display protocol variant information for channel 1:
Router# show ss7 mtp2 variant 1
Protocol version for channel 1 is Bellcore GR-246-Core Issue 2, Dec 1997
channel Specifies a channel from 0 through 3.
Release Modification
12.0(7)XR This command was introduced.
12.1(1)T This command was integrated into Cisco IOS
Release 12.1(1)T.