Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show gatekeeper zone status
VR-733
Cisco IOS Voice, Video, Fax Command Reference
show gatekeeper zone status
To display the status of zones related to a gatekeeper, use the show gatekeeper zone status command
in privileged EXEC mode.
show gatekeeper zone status
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes Privileged EXEC
Command History
Usage Guidelines Use this command to display the status of all zones related to a gatekeeper.
Examples The following is an example of output from the show gatekeeper zone status command:
Router# show gatekeeper zone status
GATEKEEPER ZONES
================
GK name Domain Name RAS Address PORT FLAGS MAX-BW CUR-BW
(kbps) (kbps)
------- ----------- ----------- ---- ----- ------ ------
sj.xyz.com xyz.com 1.14.93.85 1719 LS 0
SUBNET ATTRIBUTES :
All Other Subnets :(Enabled)
PROXY USAGE CONFIGURATION :
inbound Calls from germany.xyz.com :
to terminals in local zone sj.xyz.com :use proxy
to gateways in local zone sj.xyz.com :do not use proxy
Outbound Calls to germany.xyz.com
from terminals in local zone germany.xyz.com :use proxy
from gateways in local zone germany.xyz.com :do not use proxy
Inbound Calls from all other zones :
to terminals in local zone sj.xyz.com :use proxy
to gateways in local zone sj.xyz.com :do not use proxy
Outbound Calls to all other zones :
from terminals in local zone sj.xyz.com :do not use proxy
from gateways in local zone sj.xyz.com :do not use proxy
tokyo.xyz.co xyz.com 172.21.139.89 1719 RS 0
milan.xyz.co xyz.com 171.69.57.90 1719 RS 0
Release Modification
11.3(2)NA This command was introduced on the Cisco 2600 series and
Cisco 3600 series routers.
12.0(5)T This display format was modified for H.323 Version 2.