Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show cdapi
VR-688
Cisco IOS Voice, Video, Fax Command Reference
show cdapi
To display the Call Distributor Application Programming Interface (CDAPI), use the show cdapi
command in privileged EXEC mode.
show cdapi
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes Privileged EXEC
Command History
Usage Guidelines CDAPI is the internal application programming interface (API) that provides an interface between
signaling stacks and applications.
Examples The following is output for the show cdapi command:
Router# show cdapi
Registered CDAPI Applications/Stacks
====================================
Application TSP CDAPI Application
Application Type(s) Voice Facility Signaling
Application Level Tunnel
Application Mode Enbloc
Signaling Stack ISDN
Interface Se023
Signaling Stack ISDN
Interface Se123
Active CDAPI Calls
==================
Interface Se023
No active calls.
Interface Se123
Call ID = 0x39, Call Type = VOICE, Application = TSP CDAPI Application
CDAPI Message Buffers
=====================
Used Msg Buffers 0, Free Msg Buffers 1600
Used Raw Buffers 1, Free Raw Buffers 799
Used Large-Raw Buffers 0, Free Large-Raw Buffers 80
scarlatti1#
Release Modification
12.0(7)T This command was introduced on the Cisco AS5300 universal access server.