Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show controllers rs366
VR-693
Cisco IOS Voice, Video, Fax Command Reference
show controllers rs366
To display information about the RS-366 video interface on the video dialing module (VDM), use the
show controllers rs366 command in privileged EXEC mode.
show controllers rs366 slot port
Syntax Description
Defaults No default behavior or values.
Command Modes Privileged EXEC
Command History
Examples On a Cisco MC3810 multiservice concentrator, the following example displays information about the
RS-366 controller:
Router# show controller rs366 0 1
RS366:driver is initialized in slot 1, port 0:
STATUS STATE LSR LCR ICSR EXT T1 T2 T3 T4 T5
0x02 0x01 0x00 0x50 0xE0 0x00 5000 5000 5000 20000 10000
Dial string:
121C
Table 33 describes the significant fields shown in the display.
slot Slot location of the VDM module. On the Cisco MC3810 multiservice
concentrator, this value is either 1 or 2. If you do not enter the correct
location, the command is rejected.
port Port location of the EIA/TIA-366 interface in the VDM module. On the
Cisco MC3810 multiservice concentrator, this value is 0.
Release Modification
12.0(5)XK This command was introduced for the Cisco MC3810 multiservice
concentrator.
12.0(7)T The command introduced in Cisco IOS Release 12.0(5)XK was
integrated into Cisco IOS Release 12.0(7)T.
Table 33 show controllers Field Descriptions
Field Description
STATUS Last interrupt status.
STATE Current state of the state machine.
LSR Line status register of the VDM.
LCR Line control register of the VDM.