Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
session target (VoIP)
VR-613
Cisco IOS Voice, Video, Fax Command Reference
session target (VoIP)
To specify a network-specific address for a specified VoIP dial peer, use the session target command in
dial-peer configuration mode. To restore default values for this parameter, use the no form of this
command.
Cisco 2600 and Cisco 3600 Series Routers and Cisco MC8310 Multiservice Concentrator Voice over IP Dial Peers
session target {ipv4:destination-address | dns:[$s$. | $d$. | $e$. | $u$.] host-name | loopback:rtp
| loopback:compressed | loopback:uncompressed | ras | settlement}
no session target
Cisco AS5300 Universal Access Server Voice over IP Dial Peers
session target {ipv4:destination-address | dns:[$s$. | $d$. | $e$. | $u$.] host-name | loopback:rtp
| loopback:compressed | loopback:uncompressed | mailto: | {name | $d$}@domain-name |
ipv4:destination-address | dns:[$s$. | $d$. | $u$. | $e$.] host-name}
no session target
Cisco AS5800 Universal Access Server Voice over IP Dial Peers
session target {ipv4:destination-address | dns:[$s$. | $d$. | $e$. | $u$.] host-name | loopback:rtp
| loopback:compressed | loopback:uncompressed}
no session target
Syntax Description ipv4:destination-address IP address of the dial peer.
dns:[$s$...] host-name Indicates that the domain name server will be used to resolve the name of
the IP address. Valid entries for this parameter are characters representing
the name of the host device.
(Optional) Use one of the following three wildcards with this keyword
when defining the session target for Voice over IP (VoIP) peers:
$s$.—Indicates that the source destination pattern will be used as part of
the domain name.
$d$.—Indicates that the destination number will be used as part of the
domain name.
$e$.—Indicates that the digits in the called number will be reversed,
periods will be added between the digits of the called number, and this
string will be used as part of the domain name.
$u$.—Indicates that the unmatched portion of the destination pattern (such
as a defined extension number) will be used as part of the domain name.
loopback:rtp Indicates that all voice data will be looped back to the source. This is
applicable for VoIP peers.
loopback:compressed Indicates that all voice data will be looped back in compressed mode to the
source. This is applicable for POTS peers.