Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show call resource voice stats
VR-681
Cisco IOS Voice, Video, Fax Command Reference
show call resource voice stats
To display resource statistics for an H.323 gateway, use the show call resource voice stats command in
privileged EXEC mode.
show call resource voice stats
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes Privileged EXEC
Command History
Usage Guidelines This command displays the H.323 resources that are monitored when the resource threshold command
is used to configure and enable resource threshold reporting.
Examples The following example shows the resource statistics for an H.323 gateway:
Router# show call resource voice stats
Resource Monitor - Dial-up Resource Statistics Information:
DSP Statistics:
Utilization: 0 percent
Total channels: 48
Inuse channels: 0
Disabled channels 0:
Pending channels: 0
Free channels: 48
DS0 Statistics:
Total channels: 0
Addressable channels: 0
Inuse channels: 0
Disabled channels: 0
Free channels: 0
Table 30 describes the significant fields shown in the display.
Release Modification
12.0(5)T This command was introduced on the Cisco AS5300 universal access
server.