Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show voice permanent-call
VR-830
Cisco IOS Voice, Video, Fax Command Reference
show voice permanent-call
To display information about the permanent calls on a voice interface, use the show voice
permanent-call command in user EXEC or privileged EXEC mode.
show voice permanent-call [voice-port] [summary]
Syntax Description
Defaults No default behavior or values.
Command Modes User EXEC
Privileged EXEC
Command History
Usage Guidelines This command is available only on the Cisco MC3810 multiservice concentrator.
When no parameters are specified with this command, the output displays information for all ports
containing permanent calls. When a specific interface is specified, information is displayed about the
permanent calls for that interface only.
Examples The following is sample output for the show voice permanent-call command:
Router# show voice permanent-call 1/1
1/1 state=connect coding=G729A payload size=30 vad=off
ec=8 (ms), cng=off fax=on digit_relay=on Seq num = off, VOFR Serial0,dlci = 550,cid = 6
TX INFO :slow-mode seq#= 25, sig pkt cnt= 19646, last-ABCD=1101
hardware-state ACTIVE signal type is CEPT/MELCAS
voice-gate CLOSED,network-path OPEN MASTER
1101 1101 1101 1101 1101 1101 1101 1101 1101 1101
1101 1101 1101 1101 1101 1101 1101 1101 1101 1101
1101 1101 1101 1101 1101 1101 1101 1101 1101 1101
RX INFO :slow-mode, sig pkt cnt= 19648, under-run = 0, over-run = 0
missing = 0, out of seq = 0, very late = 0
playout depth = 0 (ms), refill count = 1
prev-seq#= 25, last-ABCD=1101, slave standby timeout 25000 (ms)
max inter-arrival time 0 (ms), current timer 384 (ms)
voice-port (Optional) Slot number or slot/port number of the voice interface for which
you wish to display permanent call information.
summary (Optional) Displays summary information about VoFR and VoATM ports
used for permanent connections.
Release Modification
12.0(3)XG This command was introduced on the Cisco MC3810 multiservice
concentrator.
12.0(4)T The command introduced in Cisco IOS Release 12.0(3)XG was integrated
into Cisco IOS Release 12.0(4)T.