Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
server (RLM)
VR-594
Cisco IOS Voice, Video, Fax Command Reference
server (RLM)
To identify an RLM server, use the server RLM configuration command. To remove the identification,
use the no form of this command
server name-tag
no server name-tag
Syntax Description
Defaults Disabled
Command Modes RLM configuration
Command History
Usage Guidelines Each server can have multiple entries of IP addresses or aliases.
Examples The following example identifies the RLM server and defines the associated IP addresses:
rlm group 1
server r1-server
link address 10.1.4.1 source Loopback1 weight 4
link address 10.1.4.2 source Loopback2 weight 3
name-tag Name to identify the server configuration so that multiple entries of server
configuration can be entered.
Release Modification
11.3(7) This command was introduced.