Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
shutdown (dial-peer)
VR-864
Cisco IOS Voice, Video, Fax Command Reference
shutdown (dial-peer)
To change the administrative state of the selected dial peer from up to down, use the shutdown command
in dial-peer configuration mode. To change the administrative state of this dial peer from down to up,
use the no form of this command.
shutdown
no shutdown
Syntax Description This command has no arguments or keywords.
Defaults no shutdown
Command Modes Dial-peer configuration
Command History
Usage Guidelines When a dial peer is shut down, you cannot initiate calls to that peer.
This command applies to both on-ramp and off-ramp store-and-forward fax functions.
Examples The following example changes the administrative state of voice telephony (plain old telephone service
[POTS]) dial peer 10 to down:
dial-peer voice 10 pots
shutdown
The following example changes the administrative state of voice telephony (POTS) dial peer 10 to up:
dial-peer voice 10 pots
no shutdown
Related Commands
Release Modification
11.3(1)T This command was introduced on the Cisco 3600 series router.
12.1(1) This command was modified for store-and-forward fax.
Command Description
dial-peer voice Enters dial-peer configuration mode, defines the type of dial peer, and
defines the dial-peer tag number.