Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
show mgcp endpoint
VR-747
Cisco IOS Voice, Video, Fax Command Reference
show mgcp endpoint
To display Media Gateway Control Protocol (MGCP) configuration information, use the show mgcp
endpoint command in EXEC mode.
show mgcp endpoint
Syntax Description
Defaults No defaults
Command Modes EXEC
Command History
Examples The following example shows how endpoints are configured:
Router# show mgcp endpoint
T1/0 ds0-group 0 timeslots 1-24 type none
T1/1 ds0-group 0 timeslots 1-24 type none
T1/2 ds0-group 0 timeslots 1-24 type none
T1/3 ds0-group 0 timeslots 1-24 type none
Related Commands
endpoint Displays the MGCP-controlled endpoints.
Release Modification
12.1(1)T This command was introduced for the Cisco AS5300 universal
access server.
12.1(3)T Output was updated to show additional gateway and platform
information.
Command Description
mgcp Starts the MGCP daemon.
show mgcp Displays general MGCP configuration information.
show mgcp connection Displays connection-related MGCP configuration information.
show mgcp statistics Displays statistical MGCP configuration information.