Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
sgcp quarantine-buffer disable
VR-633
Cisco IOS Voice, Video, Fax Command Reference
sgcp quarantine-buffer disable
To disable the Simple Gateway Control Protocol (SGCP) quarantine buffer, use the sgcp
quarantine-buffer disable command in global configuration mode. To reenable the SGCP quarantine
buffer, use the no form of this command.
sgcp quarantine-buffer disable
no sgcp quarantine-buffer disable
Syntax Description This command has no arguments or keywords.
Defaults The SGCP quarantine buffer is enabled.
Command Modes Global configuration
Command History
Usage Guidelines The SGCP quarantine buffer is the mechanism for buffering the SGCP events between two RQNT
messages.
Examples The following example shows the SGCP quarantine buffer being disabled:
sgcp quarantine-buffer disable
Related Commands
Release Modification
12.0(7)XK This command was introduced on the Cisco MC3810 multiservice
concentrator and the Cisco 3600 series routers (except for the Cisco
3620) in a private release that was not generally available.
12.1(2)T This command was integrated into 12.1(2)T and was generally available
on the Cisco 3600 series router and the Cisco MC3810 multiservice
concentrator
Command Description
sgcp Starts and allocates resources for the SGCP daemon.
sgcp call-agent Defines the IP address of the default SGCP call agent.
sgcp graceful-shutdown Gracefully terminates all SGCP activity.
sgcp max-waiting-delay Sets the SGCP maximum waiting delay to prevent restart avalanches.
sgcp modem passthru Enables SGCP modem or fax pass-through.
sgcp request retries Specifies the number of times to retry sending “notify” and “delete”
messages to the SGCP call agent.
sgcp request timeout Specifies how long the system should wait for a response to a request.