Filter
Top Products
Cisco IOS Voice, Video, and Fax Commands: R Through Sh
register e164
VR-563
Cisco IOS Voice, Video, Fax Command Reference
The following commands deregister an address with the gatekeeper:
dial-peer voice 111 pots
no register e164
The following example shows that you must have a connection to a gatekeeper and define a unique E.164
address before you can register an address:
dial-peer voice 222 pots
port 1/0/0
destination 919555....
register e164
ERROR-register-e164:Dial-peer destination-pattern is not a full E.164 number
no gateway
dial-peer voice 111 pots
register e164
ERROR-register-e164:No gatekeeper
Related Commands Command Description
destination-pattern Specifies either the prefix, the full E.164 telephone number, or an ISDN
directory number (depending on the dial plan) to be used for a dial peer.
dial-peer Enters dial-peer configuration mode, defines the type of dial peer, and
defines the tag number associated with a dial peer.
port Enables an interface on a PA-4R-DTR to operate as a concentrator port.
show gateway Displays the current gateway status.
zone prefix Configures the gatekeeper with knowledge of its own prefix and the prefix
of any remote zone.